TM 5-3805-280-24-2
Camshaft, Balancer Shafts and Timing Gear Train
16
9. Remove thrust plate (A) from slot behind camshaft
25
gear.
A--Thrust Plate
RG,16,DT7499 1914NOV975/5
VISUALLY INSPECT CAMSHAFT
1. Clean camshaft in solvent. Dry with compressed air.
2. Inspect all camshaft lobes (A) and journals (B) for wear
or damage. Replace camshaft as necessary.
IMPORTANT: New camshaft followers can be used
with old camshaft. DO NOT reuse old
camshaft followers with a new
camshaft. (See Group 05 for camshaft
follower replacement.)
A--Lobes
NOTE: Very light score marks are acceptable if valve lift
B--Journals
is within specification. If pitting or galling exists,
replace camshaft. (See MEASURE VALVE LIFT
earlier in this group.)
RG,16,DT7498 1914NOV971/1
13-257