TM 5-3805-280-24-2
Alternator, Regulator, and Charging System Wiring
INSPECT, REMOVE, AND INSTALL FAN
BELT
1. Check belt regularly for wear, especially for cracks at
the bottom of grooves and for frayed edges.
2. If necessary, replace belt.
3. Pull tension adjuster idler away from belt using a 15
mm wrench on hex head of cap screw (A) in idler.
4. Remove the old belt.
5. Install the belt around all pulleys except adjuster idler.
6. Pull adjuster idler out just far enough to slide belt
behind idler.
7. Slowly release adjuster idler against belt.
16
1672
2
A--Hex Head of Cap Screw
TX,16,UU3251
1919SEP981/1
16-16