TM 5-3805-280-24-2
22
DISASSEMBLE AND ASSEMBLE AIR INTAKE
26
CAUTION: Before removing the minimum
pressure valve purge valve of all air pressure
2. Loosen clamp (1) and remove elbow (23).
3. Loosen clamp (2) and remove air engine air inlet hose
(8).
4. Remove adapters (6), nipples (7), elbow (4), and
nipples (3).
5. Remove cap screws (19) and nuts (20).
6. Remove mounting bands (11, 12, 14, and 21).
7. Repair or replace parts as necessary.
8. Install mounting bands (11, 12, 14, and 21).
9. Install cap screws (19) and nuts (20).
10. Install nipples (3), elbow (4), nipples (7), and adapters
(6).
11. Install air engine air inlet hose (8). Tighten clamp (2).
12. Install elbow (23) and tighten clamp (1).
CED,OUOE039,15 1915APR991/1
20-22