TM 5-3805-280-24-2
Buckets
4. Slowly loosen hydraulic lines (A) and disconnect.
5. Remove cap screws (2) from left side of pin (3).
6. Remove pin (3).
7. Remove cap screws (9), washers (8), and retaining
plate (7) from pin (4).
8. Remove pin (4). Take note of location and quantity of
any shims.
9. Raise arm to separate from the quick-disconnect hitch
A--Hydraulic Lines (2)
(1).
10. Replace parts as necessary.
11. Position arm into the quick-disconnect hitch. Align the
pin bores.
12. Install pin (4), shims (5) and spacer (6).
13. Install retaining plate (7), cap screws (9) and
lockwashers (5).
14. Install pin (3) and set screw (2).
15. Install hydraulic lines (A).
CED,OUOE042,5068 1916APR993/3
33
3302
16
21-16