TM 5-3805-280-24-2
Rock Drill
44
DISASSEMBLE AND ASSEMBLE HP
9506
50
ACCUMULATOR-CENTRAL
1. Remove inflating screw (1) and BS ring (2).
2. Remove O-ring (3) and cover (4). Discard O-ring.
3. Remove diaphragm (5).
4. Inspect, repair or replace parts as necessary.
5. Apply silicone grease to the internal face of diaphragm
(5) and install the diaphragm.
6. Install new O-ring (3) and cover (4). Tighten the cover
using a torque wrench and special socket, 95372.
Cover--Specification
Torque ..................................................................... 1400 Nm (1030 ft-lb)
Install BS ring (2) and inflating screw (1).
1--Inflating Screw
2--BS Ring
3--O-Ring
4--Cover
5--Diaphragm
6--Accumulator Body
CED,OUOE019,6
1911MAR991/1
23-46