TM 5-3805-280-24-2
Rock Drill
44
9506
58
A--Plate (2 used)
C--Needle Bearings (2
D--Slider
B--Cartridge
used)
33. Replace needle bearings (C) using shouldered pin,
30. Inspect bearing race surface for pitting or rust.
59828.
There shall be no pitting or rust.
34. Inspect slider (D) for scratches. There shall be no
31. Inspect two plates (A) for scratches and black
scratches.
coating condition. There shall be no scratches.
Replace plate if black coating has disappeared.
32. Inspect cartridge (B) for scratches on vanes and
wear of cam ring. There shall be no scratches on
vanes or wear of cam ring.
Continued on next page
CED,OUOE019,9
1912MAR998/34
23-54