TM 5-3805-280-24-2
Rock Drill
44
9506
1--Oiler
6--Stop Washer
12--Spacer
18--Screw
105
2--Screw (2 used)
7--Elastic Pin
13--Screw
19--Special Nut
3--Stop Washer
8--Self-Lubricating Ring
14--Special Nut
20--Pin
4--Self-Lubricating Ring (2
9--Bearing
15--Shock Absorber
21--Scraper Joint
used)
10--Screw (5 used)
16--Washer
22--Lower Support
5--Screw (4 used)
11--Washer (5 used)
17--Threaded Rod
10. Install scraper joint (21), and pin (20).
1. Remove oiler (1).
11. Install screw (18), and nut (19).
2. Remove six screws (2), and stop washer (3).
12. Install threaded rod (17), washer (16), shock
3. Remove four screws (5), stop washer (6), elastic
absorber (15), special nut (14), and screw (13).
pin (7), and two self-lubricating rings (4).
13. Install spacer (12), five screws (10), and washers
4. Remove self-lubricating ring (8), and bearing (9).
(11).
5. Remove five screws (10), washers (11), and spacer
14. Install bearing (9), and self-lubricating ring (8).
(12).
15. Install two self-lubricating rings (4), elastic pin (7),
6. Remove screw (13), special nut (14), shock
stop washer (6), and four screws (5).
absorber (15), washer (16), and threaded rod (17).
16. Install stop washer (3), and six screws (2).
7. Remove screw (18), and nut (19).
17. Install oiler (1).
8. Remove pin (20), and scraper joint (21).
9. Inspect, repair or replace parts as necessary.
Continued on next page
CED,OUOE019,14 1930MAR992/13
23-97
