TM 5-3805-280-24-2
Rock Drill
44
9506
1--Screw (2 used)
8--Adapter (2 used)
15--Washer
22--Special Nut
109
2--Washer (2 used)
9--Adapter (2 used)
16--Sleeve
23--Shock Absorber
3--Detector Support
10--Oil Restrictor (2 used)
17--Grooved Sleeve
24--Washer
4--Stud
11--Screw (8 used)
18--O-Ring
25--Threaded Rod
5--Special Nut
12--Brake Reducer Motor
19--Screw
26--Upper Support
6--Upper Support
13--Screw
20--Special Nut
7--Adapter
14--Screw (3 used)
21--Screw
40. Inspect, repair or replace parts as necessary.
29. Remove two screws (1), washers (2), and detector
support (3).
41. Install threaded rod (25), washer (24), shock
absorber (23), special nut (22), and screw (21).
30. Remove stud (4), and special nut (5).
42. Install special nut (20), and screw (19).
31. Remove adapter (7).
43. Install new O-ring (18).
32. Remove two adapters (8), two adapters (9), and
two oil restrictors (10).
44. Install grooved sleeve (17), and sleeve (16).
33. Remove eight screws (11), and brake reducer
45. Install washer (15), and three screws (14).
motor (12).
46. Install screw (13).
34. Remove screw (13).
47. Install brake reducer motor (12), and eight screws
35. Remove three screws (14), and washer (15).
(11).
36. Remove sleeve (16), and grooved sleeve (17)
48. Install two oil restrictors (10), two adapters (9),
and two adapters (8).
37. Remove and discard O-ring (18).
49. Install adapter (7).
38. Remove screw (19), and special nut (20).
50. Install stud (4), and special nut (5).
39. Remove screw (21), special nut (22), shock
absorber (23), washer (24), and threaded rod (25).
Continued on next page
CED,OUOE019,14 1930MAR996/13
23-101