TM 5-3805-280-24-2
Rock Drill
44
9506
90. Install rod jaw (18), and three screws (17).
80. Install pin (38).
114
91. Install guiding ring (15), piston joint (14), lining
81. Install pins (36 and 37), and two screws (35).
(13), new O-ring (12), rod seal (11), and scraper
joint (10).
82. Install two adapters (34).
92. Install rod (9).
83. Install two oil restrictor adapters (33), and two oil
restrictors (32) (used only on upper clamp
93. Install hydraulic cylinder (8), and attachment
support).
cylinder (7).
84. Install clamp support (30).
94. Install pin (6), and two elastic pins (5).
85. Install oiler (29).
95. Install two plugs (4).
86. Install two self-lubricating rings (26), and pin (27).
96. Install two adapters (3), two oil restrictors (1), and
two oil restrictor adapters (2).
87. Install pin (25), and two elastic pins (28).
88. Install two screws (23), and nuts (24).
89. Install rod clamp (22), block (21), two screws (19),
and washers (20).
Continued on next page
CED,OUOE019,14 1930MAR9911/13
23-106