TM 5-3805-280-24-2
Rock Drill
44
9506
1--Threaded Pin
4--O-Ring
7--Locknut (16 used)
10--Shock Absorber (28
107
2--Locknut
5--Central Tube
8--Pin (56 used)
used)
3--Washer
6--Screw (16 used)
9--Pin (28 used)
11--Separator (4 used)
24. Install four separators (11).
18. Remove threaded pin (1), locknut (2), washer (3),
and O-ring (4). Discard the O-ring.
25. Install 28 shock absorbers (10), 28 pins (9), and
56 pins (8).
19. Remove central tube (5).
26. Install 16 screws (6), and locknuts (7).
20. Remove 16 screws (6), and locknuts (7),
27. Install central tube (5).
21. Remove 56 pins (8), 28 pins (9), and 28 shock
absorbers (10).
28. Install new O-ring (4), threaded pin (1), locknut (2),
and washer (3).
22. Remove four separators (11).
23. Inspect, repair or replace parts as necessary.
Continued on next page
CED,OUOE019,14 1930MAR994/13
23-99