TM 5-3805-281-10
Maintenance--Every 1000 Hours
CHANGE PUMP DRIVE GEARBOX OIL
1. Remove plastic cap and filler plug (B).
2. Remove drain plug (C). Allow oil to drain into a
container. Dispose of waste oil properly.
3. Apply Liquid TEFLON Pipe Thread Sealant to drain
plug. Install plug.
Pump Drive Gearbox--Specification
Oil Capacity ........................................................................... 1.0 L (1.3 qt)
4. Add oil. (See Fuels and Lubricants chapter.)
5. Pull dipstick (A) and check oil level. Oil level must be
approximately halfway below "H" (level) mark.
6. Install filler cap. Install dipstick.
A--Dipstick
B--Filler Plug
C--Drain Plug
CED,TX14740,6102
1923APR981/1
CHANGE AIR CLEANER ELEMENTS
1. Open left front service door.
2. Loosen wing nut to remove cover.
3. Remove wing nut and primary element (A).
A--Primary Element
Continued on next page
TX,85,FF2318 1901NOV911/2