TM 5-3805-281-10
Maintenance
DRAIN COOLING SYSTEM
Drain and flush cooling system using commercial
products, replace thermostats, radiator cap, and refill with
new coolant.
1. Check coolant hoses (A) for cracks and leaks. Replace
if necessary.
2. Tighten clamps.
3. Check radiator and oil cooler for dirt, grease, leaks,
and loose or broken mountings. Clean radiator and oil
cooler fins.
CAUTION: Prevent possible injury from hot
spraying water. DO NOT remove radiator filler
cap unless engine is cool. Then turn cap slowly
to the stop.
4. Release air to relieve pressure. Remove filler cap.
Cooling System--Specification
Capacity...................................................................... Approx. 30 L (32 qt)
A--Coolant Hoses
CED,OUOE042,73 1907APR991/3
5. Turn radiator petcock (A) counterclockwise to open
valve. Allow coolant to drain into a container. Dispose
of waste coolant properly.
A--Radiator Petcock
Continued on next page
CED,OUOE042,73 1907APR992/3