TM 5-3805-281-24-1
Operational Checkout Procedure
YES: Go to next check.
PROPEL LEVER AND
A--Propel Lever and Pedal Forward
PEDAL CUSHION
B--Propel Lever and Pedal Rearward
CYLINDER CHECKS
NO: Repair or repair
cushion cylinders. Go to
Engine OFF.
Group 3360.
Push each propel lever and pedal forward (A), then
9005
release.
10
5
Pull each propel lever and pedal rearward (B), then
T7531AO
UN07JUN91
release.
Does each lever and pedal have equal effort to operate
forward and reverse?
Does each lever and pedal return to neutral at the same
time when released?
1/1
2 OPERATOR STATION CHECKS--ENGINE ON
1/1
MONITOR CIRCUIT AND
A--Coolant Temperature Gauge
YES: Go to next check.
GAUGE CHECKS
B--Fuel Gauge
NO: Check engine
Start engine.
lubrication system if
engine oil pressure
indicator is on after
IMPORTANT: Stop the engine if alternator or engine
engine starts. Go to
oil pressure indicators do not go OFF or a monitor
Group 9010-15.
indicator comes ON after engine starts.
Check alternator belt if
Does alternator and engine oil pressure indicators go
alternator indicator is on
OFF after engine starts?
after engine starts. Go to
Group 0510. If OK, check
Do all monitor indicators remain OFF after engine starts?
fuses and alternator. Go
to Group 9015-15.
The buzzer will sound if engine oil pressure is low.
Check switches sensors,
Is coolant temperature gauge needle (A) in normal
and gauges. Go to Group
operating zone after a few minutes?
9015-15.
Does fuel gauge (B) indicate fuel level?
Check fluid levels.
T102096 UN26JUL96
Stop engine.
1/1