TM 5-3805-281-24-1
Sub-System Diagnostics
ECONOMY (E) MODE
YES: Switch is OK. Go to
SWITCH (S11) CHECK
next check.
NO: Switch has failed.
Replace.
T118513 UN21NOV98
Turn key switch OFF.
Disconnect engine mode and RPM control unit (A4) connector.
Connect ohmmeter between pins 1 and 2 of connector.
Measure continuity with economy (E) mode switch in OFF and ON positions.
Does ohmmeter read open with switch in OFF position, and continuity with switch in
9015
ON position?
15
53
Reconnect engine mode and RPM control unit connector.
1/1
ECONOMY (E) MODE
YES: Indicator lamp or
SWITCH (S11) HARNESS
controller has failed.
CHECK
Replace.
NO: Harness has failed.
Repair.
T118512 UN21NOV98
Turn key switch OFF.
Disconnect 20-pin harness connector from monitor controller and display.
Connect ohmmeter between pins 35 and 38 of harness connector.
Measure continuity with economy (E) mode switch in OFF and ON positions.
Does ohmmeter read open with switch in OFF position, and continuity with switch in
ON position?
1/1
4-121