TM 5-3805-281-24-1
Track System
REMOVE AND INSTALL TRACK ROLLER
1. Swing upperstructure 90 and lower bucket to raise
track off ground. Keep angle between boom and arm
90--110 and position round side of bucket on ground.
01
0130
3
CAUTION: Prevent possible injury from
unexpected machine movement. Put shop
stands under frame to support machine while
removing track roller.
The approximate weight of the 330LCR is 33
049 kg (72,864 lb).
Machine--Specification
Weight...................................................................... 33 049 kg (72,864 lb)
approximate
2. Put shop stands under machine.
CED,OUOE023,113
1920MAY981/3
CAUTION: Prevent possible injury from high
pressure grease. Do not remove grease fitting
(A) from valve (B).
3. Loosen valve (B) one to two turns to release grease
through bleed hole (C).
A--Grease Fitting
B--Valve
C--Bleed Hole
Continued on next page
CED,OUOE023,113
1920MAY982/3