TM 5-3805-281-24-1
Track System
4. Remove cap screws (B) and carrier roller (A).
5. Install carrier roller and tighten cap screws (B).
Roller-to-Frame Cap Screw--Specification
01
0130
Torque ......................................................................... 265 Nm (195 lb-ft)
11
6. Install carrier roller and tighten cap screws (B).
7. Check carrier roller oil level by removing plug in cover
and add as necessary. The approximate capacity is 85
mL (2.9 fl oz). (See Track Roller, Front Idler and
Carrier Roller Oil in Group 0004.)
A--Carrier Roller
B--Cap Screw (4 used)
8. Remove wooden blocks and jack.
9. Adjust track sag. (See procedure in this group.)
CED,OUOE023,118
1921MAY983/3
9-11
