TM 5-3805-281-24-2
Removal and Installation
REMOVE AND INSTALL STARTER
IMPORTANT: Always disconnect the negative (-)
battery cables before removing starter
or a short circuit could result.
1. Disconnect negative (-) battery cables at battery.
2. Disconnect positive battery cable (A).
3. Remove nut (B).
4. Disconnect connector (E).
A--Positive Battery Cable
B--Nut
5. Disconnect ground strap (D).
C--Cap Screw (2 used)
D--Ground Strap
04
E--Connector
0400
CAUTION: The approximate weight of starter is
39
23 kg (50 lb).
Starter--Specification
Weight................................................................ 23 kg (50 lb) approximate
6. Remove cap screws (C). Remove starter.
7. Replace parts as necessary.
8. Install starter.
9. Tighten cap screws (C).
Starter Cap Screw--Specification
Torque ............................................................................. 47 Nm (35 lb-ft)
10. Connect ground strap (D).
11. Connect connector (E).
12. Connect positive battery cable (A).
13. Connect negative (-) battery cables at battery.
CED,OUOE024,212
1918MAY981/1
