TM 5-3805-281-24-2
Camshaft and Timing Gear Train
MEASURE THRUST WASHER THICKNESS
1. After removal of camshaft, check the two thrust
washers individually for proper thickness.
Thrust Washer--Specification
Thickness............................................. 2.24--2.34 mm (0.088--0.092 in.)
2. Replace washers if worn or damaged.
Measuring Camshaft Thrust Washers
RG,RG34710,1204
1923OCT971/1
INSPECT AND MEASURE CAMSHAFT
FOLLOWERS
1. Inspect camshaft followers for uneven wear or
damage. Also inspect corresponding camshaft lobe for
wear or damage. Replace as necessary.
2. Measure follower O.D. and follower bore I.D. in
cylinder block.
Camshaft Follower--Specification
Inspecting Camshaft Followers
OD ......................................................... 17.33--17.35 mm (0.682--0.683
in.)
Camshaft Follower Bore in Block--Specification
ID ............................................................................... 17.384--17.440 mm
(0.6845--0.6865 in.)
Replace cam followers that are not within specification.
Replace cylinder block if any one follower bore is not
within specification.
RG,RG34710,1205
1923OCT971/1