TM 5-3805-281-24-2
External Fuel Supply Systems
7. Tighten cap screws.
1. Drain fuel. Approximate capacity is 560 L (148 gal).
Fuel Level Sender Cap Screw--Specification
2. Disconnect connectors.
Torque..................................................................... 4.5 Nm (40 lb-in.)
CAUTION: The approximate weight of the
fuel tank (without fuel) is 126 kg (278 lb).
8. Connect connectors.
Fuel Tank (Empty)--Specification
9. Install cap screws under fuel tank.
Weight ..................................................... 126 kg (278 lb) approximate
10. Install bottom access cover.
3. Remove bottom access panel.
11. Fill fuel tank with proper fuel. (See Fuel
Specifications in Fuels and Lubricants, Group
4. Disconnect fuel lines.
0004.)
5. Remove cap screws as required.
6. Apply thread lock and sealer (medium strength) to
threads of screws (A).
05
0560
3
TX,0560,DW246 1920MAY982/2
REMOVE AND INSTALL PRIMARY FUEL
FILTER (WATER SEPARATOR)
1. Open right access door to access water separator.
2. Open drain valve (B) and press pump (A) to extract
water from the fuel system. Collect waste in a
container and dispose of it properly.
A--Pump
B--Drain Valve
Continued on next page
TX,0560,DW247 1920MAY981/2