TM 5-3805-281-24-2
External Fuel Supply Systems
4. Install fuel filter onto guide pins on fuel filter base. Hold
filter firmly against base.
5. Secure bottom retaining spring first, then secure top
retaining spring.
6. Install drain plug. Tighten bleed plug and drain plug
securely. Do not overtighten.
7. Open fuel shut-off valve and bleed fuel system. (See
procedure in this group.)
CED,OUOE024,224
1920MAY982/2
05
REPLACE FINAL FUEL FILTER CHECK
0560
VALVE
7
1. Drain and remove fuel filter (C) as described earlier in
this group.
2. Remove fuel filter inlet line (A) (shown removed).
3. Inspect and clean fuel filter base.
4. Remove check valve housing (B) from fuel filter base
and discard.
A--Fuel Filter Inlet Line
5. Install new check valve and tighten securely.
B--Check Valve Housing
C--Fuel Filter
6. Install fuel inlet line and tighten to maximum
specification. DO NOT overtighten.
Fuel Inlet Line--Specification
Torque ......................................................... 17 Nm (150 lb-in.) maximum
7. Install fuel filter and bleed fuel system. (See procedure
in this group.)
CED,OUOE024,225
1920MAY981/1