Removal and Installation
250 kg (550 lb) approximate
Rubber Mount-to-Frame Cap Screw
108 Nm (80 lb-ft)
Cab-to-Platform Cap Screw
64 Nm (47 lb-ft)
Cab and Platform-to-Rubber Mount
205 Nm (152 lb-ft)
REMOVE AND INSTALL CAB
NOTE: It is not necessary to remove the seat to remove
1. Remove four cap screws (D) and loosen three screws
(E) to remove rear console cover behind seat.
2. Disconnect battery ground cable.
3. Remove cab floor mat.
D--Cap Screw (4 used)
E--Cap Screw (3 used)
Continued on next page