TM 5-3805-281-24-2
Chassis Weights
REMOVE AND INSTALL COUNTERWEIGHT
1. Park machine on level ground.
2. Remove two plastic caps from top of counterweight
(D).
CAUTION: The approximate weight of 330LCR
counterweight is 6800 kg (14,991 lb).
Counterweight--Specification
Weight..................................................... 6800 kg (14,991 lb) approximate
The lifting capacity of a lifting eyebolt decreases as the lift
angle increases from vertical. A spreader bar should be
used to obtain, as close as possible, a vertical lift from
eyebolts.
3. Connect counterweight to a hoist (A) using a spreader
bar (B) and M42-4.5 metric lifting eyebolts (C) such as
JT05558 Metric Lifting Eyebolt.
4. Remove cap screws and washers (E).
5. Remove counterweight.
6. Install cap screws and washers. Tighten cap screws as
indicated.
Frame-to-Counterweight Cap Screw--Specification
Torque ..................................................................... 2403 Nm (1772 lb-ft)
7. Remove hoist, spreader bar, and eyebolts.
8. Install plastic caps.
A--Hoist
B--Spreader Bar
C--M42-4.5 Metric Lifting Eyebolt (2 used)
D--Counterweight
17
E--Cap Screw and Washer (4 used)
1749
2
CED,OUOE042,5064 1915APR991/1
