TM 5-3805-281-24-2
Hydraulic System
3. Loosen T-bolt type hose clamps on coupling (C). Slide
hose onto oil cooler-to-hydraulic oil tank line (A).
33
3360
4. Repair or replace restriction valve (E) and snap ring
139
(D).
5. Tighten T-bolt type hose clamps on coupling (C).
Coupling T-Bolt Type Hose Clamp--Specification
Torque ........................................................................... 4.4 Nm (40 lb-in.)
6. Check oil level in hydraulic oil tank. Add oil as
necessary. (See Hydraulic Oil in Group 0004.)
IMPORTANT: Hydraulic pump will be damaged if not
filled with oil before starting. Procedure
must be performed to fill pump housing
whenever oil has been drained from the
pump or hydraulic oil tank.
7. Do Hydraulic Pump Start-Up Procedure. (See
A--Oil Cooler-to-Hydraulic Oil Tank Line
B--Oil Cooler
procedure in this group.)
C--Coupling
D--Snap Ring
E--Restriction Valve
CED,OUOE026,5
1918JUN982/2
19-167
