TM 5-3805-294-10
OPERATOR MAINTENANCE
INSTALLING AND OPERATING THE COMPACTOR
INITIAL SETUP:
References (cont.)
Tools and Special Tools
Screwdriver, Pry Bar, 12 in. (304 mm) Long
(WP 0095, Table 2, Item 11)
Wrench, Open End, Adjustable 0.95 in. (24 mm)
(WP 0095, Table 2, Item 19)
Equipment Condition
Wrench, Open End, 2 1/2 in. (63.5 mm)
Safely park and shutdown machine. (WP 0009)
(WP 0095, Table 2, Item 15)
Bucket removed. (WP 0014)
Wrench, Open End, 3 in. (76 mm)
(WP 0095, Table 2, Item 14)
Materials/Parts
Rags, Wiping (WP 0097, Table 1, Item 15)
References
INSTALLING COMPACTOR
1.
Start machine. (WP 0007)
WARNING
Keep hands away from pin and alignment holes while thumb is being moved. Only use prybar
to push pin. Failure to comply may result in injury or death to personnel.
2.
Retract hydraulic thumb cylinder (Figure 1, Item 1).
0021-1