TM 5-3805-294-10
0023
DEEP DIG ARM OPERATION - Continued
6
HYEX03405
Figure 4.
Turn RPM Dial.
NOTE
When the deep dig control pattern switch is in the ON position, the arm cylinder is
controlled by the attachment pedal and can only be retracted.
The arm cylinder can only be retracted. It is necessary to occasionally retract the arm
cylinder due to the weight of the deep dig arm.
With the deep dig control pattern switch in the ON position, the pilot control levers operate
in the same way.
6.
Slowly cycle bucket cylinder (Figure 5, Item 5) and deep dig bucket cylinder (Figure 5, Item 6) until full smooth
movement of each cylinder is obtained.