TM 5-3805-294-10
0034
ADJUSTING COOLANT HEATER RUN TIME - Continued
Adjusting the run time must be performed every time a start program is selected.
1.
Press the heater button (Figure 4, Item 10) and the preselected run time (Figure 4, Item 11) will appear on the
display (Figure 4, Item 2).
2
11
120
10
6
5
HYEX00021
Figure 4. Adjusting Run Time.
2.
Press the left arrow button (Figure 4, Item 5) or right arrow button (Figure 4, Item 6) to adjust run time (Figure
4, Item 11) up or down.
3.
After desired run time (Figure 4, Item 11) is selected, wait approximately 5 seconds and run time is set.
END OF TASK
USING COOLANT HEATER MANUALLY
1.
Press heater button (Figure 5, Item 10) and the coolant heater will start and run.
11
120
10
5
6
HYEX00020
Figure 5.
Manually Start Coolant Heater.
2.
If desired, press the left arrow button (Figure 5, Item 5) or right arrow button (Figure 5, Item 6) to adjust run
time (Figure 5, Item 11) up or down.
3.
To manually shut coolant heater off press the heater button (Figure 6, Item 10). The coolant heater will do a
normal cool-down cycle and then turn itself off.