TM 5-3805-294-10
OPERATOR MAINTENANCE
HYDRAULIC HOSE REEL DOES NOT OPERATE
INITIAL SETUP:
References (cont.)
References
Equipment Condition
Engine running. (WP 0007)
TROUBLESHOOTING PROCEDURE
Table 1. Hydraulic Hose Reel Does Not Operate.
Test or Inspection
Corrective Action
Malfunction
Check hand held hydraulic tool
1.
If switch is OFF, set hand held
1.
Hand Held
circuit switch position.
hydraulic tool circuit switch to
Hydraulic Tool
Circuit Switch is
ON. (WP 0026)
OFF.
2.
If switch is ON, proceed to
Malfunction 2.
1.
2.
Cab Auxiliary
Shut down engine. (WP 0009)
Power Connector
One Fuse Blown.
2.
Remove F13 AUX 10A fuse.
3.
Visually inspect F13 AUX 10A
1.
If fuse blown, replace F13 AUX
fuse for blown fuse.
10A fuse. (WP 0084)
2.
If fuse not blown, proceed to
Malfunction 3.
Visually inspect hydraulic
1.
If quick disconnect is fully
3.
Hydraulic Supply
supply quick disconnect.
seated, proceed to Malfunction
Quick Disconnect
4.
Not Fully Seated.
If quick disconnect is not fully
2.
seated, reconnect quick
disconnect properly.
3.
If quick disconnect is
damaged, notify Field
Maintenance.
0075-1