TM 5-3805-294-10
0089
REMOVAL - Continued
4
2
HYEX00169
Figure 2. Inspect Seal.
3.
If seal (Figure 2, Item 4) is damaged, contact field maintenance.
END OF TASK
SERVICE
WARNING
Particles blown by compressed air are hazardous. Ensure air stream is directed away from
user and any personnel in the area. Use a maximum of 30 psi (2.0 bar) when compressed
air is used to clean parts. Always wear safety glasses when using compressed air. Failure to
comply may result in injury or death to personnel.
NOTE
Contact field level maintenance for an air hose and air nozzle to service the air filter.
If HYEX is equipped with a Supplemental Armor Set, refer to and use procedure found
in TM 5-3805-295-13&P.
1.
Lightly tap filter (Figure 3, Item 2) with hand.
