TM 5-3805-294-23-1
FIELD MAINTENANCE
DTC 1347.03 - SUCTION CONTROL VALVE SIGNAL OUT OF RANGE HIGH
INITIAL SETUP:
References (cont.)
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
Volume 3, WP 0345
(Volume 5, WP 0796, Table 2, Item 119)
Volume 3, WP 0363
Accessory Kit, MSD Electronic Equipment
Volume 3, WP 0369
(Volume 5, WP 0796, Table 2, Item 2)
Volume 4, WP 0508
Multimeter, Digital
Volume 4, WP 0509
(Volume 5, WP 0796, Table 2, Item 77)
Volume 4, WP 0510
Probe Set, Standard
Volume 5, WP 0800
(Volume 5, WP 0796, Table 2, Item 91)
Test Set, MSD Electronic Systems
Equipment Condition
(Volume 5, WP 0796, Table 2, Item 116)
Machine safely parked and shut down (TM
5-3805-294-10). (Volume 5, WP 0794)
Personnel Required
Test Equipment Setup for MSD and Service
Construction Equipment Repairer 91L (2)
ADVISOR. (Volume 3, WP 0375)
References
TM 5-3805-294-10 (Volume 5, WP 0794)
Troubleshooting Sequence
DTC 1347.03
When DTC is Displayed
The engine is cranking or running, during Harness Diagnostic Mode Test, at key ON ECU startup process and the
error condition is active.
Related Information
Typically, this means that there is a short to power in the suction control valve circuit. The engine will probably not
start because the valve is shut off when power is applied to it.
Alarm Level
Warning.
Control Unit Response
The ECU will not be able to control the high-pressure fuel pump suction control valve.
0100-1