TM 5-3805-294-23-1
0111
Table 1. Abnormal Engine Noise - Continued.
Test or Inspection
Corrective Action
Malfunction
15.
Perform engine oil pressure
test with gauge. (Volume 3,
WP 0335)
16.
Install engine oil pressure
1.
If engine oil gauge pressure
sensor and reconnect
matches Service ADVISOR
connector P04. (Volume 3,
reading, discontinue this
troubleshooting procedure and
WP 0417)
perform procedure for Engine
Oil Pressure Low. (WP 0122)
2.
If engine oil gauge pressure
does not match Service
ADVISOR reading, proceed to
Malfunction 3.
Perform Air in Fuel Test.
1.
If air is found in fuel system,
3.
Air in Fuel Test.
repair fault found in Air In Fuel
(Volume 3, WP 0315)
Test. (Volume 3, WP 0315)
Restore machine to original
condition.
2.
If air is not found in fuel system,
proceed to Malfunction 4.
Visually inspect turbocharger
1.
If hose(s) are damaged,
4.
Turbocharger
for loose and damaged hoses
replace hose(s). (Volume 3,
Hoses and Clamps
and clamps. (Volume 3,
Are Damaged or
WP 0452)
Loose.
WP 0452)
2.
If clamps are damaged,
replace clamp(s). (Volume 3,
WP 0452)
3.
If clamp(s) are loose, tighten
clamp(s). (Volume 3,
WP 0452) Restore machine to
original condition.
4.
If hose and clamps are not
loose and not damaged,
proceed to Malfunction 5.
Perform turbocharger
1.
If damaged or faulty, replace
5.
Turbocharger is
inspection. (Volume 3,
turbocharger. (Volume 3,
Damaged or Faulty.
WP 0382)
WP 0452) Restore machine to
original condition.
If not damaged and not faulty,
2.
proceed to Malfunction 6.
1.
Remove valve cover. (Volume
6.
Valves Out of
Adjustment.
3, WP 0453)
0111-3