TM 5-3805-294-23-1
0111
Table 1. Abnormal Engine Noise - Continued.
Test or Inspection
Corrective Action
Malfunction
4.
Select Engine Control Unit
(ECU) Only. (Volume 3,
WP 0363)
5.
Under Connected Data Points,
select ECU - (shown with
engine serial number).
(Volume 3, WP 0363)
6.
Under ECU - (shown with
engine serial number), select
ECU - Data List - All. (Volume
3, WP 0363)
7.
Under ECU - Data List - All,
select Engine Oil Pressure.
(Volume 3, WP 0363)
8.
Monitor the Engine Oil
Pressure. Note reading.
9.
When finished monitoring,
select Readings and select
Disconnect From Model(s).
(Volume 3, WP 0363)
10.
Select Yes to terminate your
readings connection. (Volume
3, WP 0363)
11.
Shut down engine and turn the
key switch to the OFF position
(TM 5-3805-294-10). (Volume
5, WP 0794)
12.
Remove engine compartment
lower access cover. (Volume
4, WP 0593)
13.
Disconnect engine wiring
harness connector P04 from
engine oil pressure sensor.
(Volume 5, WP 0800, Figure
56)
14.
Remove engine oil pressure
sensor. (Volume 3, WP 0417)
0111-2