TM 5-2420-230-24-1
(6)
Remove four bolts (14), lockwashers (15), gasket (15.1), and cover plate (16) located at top, right rear of
transmission. Discard lockwashers and gasket.
(7)
Remove two bolts (19) and lockwashers (20) from control cylinder assembly (21). Discard lockwashers.
(7.1) Remove cotter pin (21.1), pin (21.2), and control cylinder assembly (21) from straight shaft (18). Discard cotter
pin.
(8)
Deleted.
(9)
Loosen collar nut (23) and remove transmission oil dipstick tube (24).
(10) Remove elbow (25) from reducer (26).
(11) Remove reducer (26) from transmission housing (27).
(12) Deleted.
(13) Deleted.
b. Installation.
(1)
Deleted.
(2)
Install reducer (26) in transmission housing (27).
(3)
Install elbow (25) in reducer (26).
(4)
Install transmission oil dipstick tube (24) by tightening collar nut (23) onto elbow (25).
(5)
Deleted.
(6)
Install control cylinder assembly (21) on straight shaft (18) with pin (21.2) and new cotter pin (21.1).
(6.1) Install control cylinder assembly (21) with two new lockwashers (20) and bolts (19).
(7)
Deleted.
(8)
Install gasket (15.1) and cover plate (16) with four new lockwashers (15) and bolts (14).
Change 1
4-32