TM 5-2420-230-24-1
(4)
Remove engine barring cover plate (5) and preformed packing (5.1) from engine bell housing (5.2). Discard
preformed packing.
(5)
Remove two bolts (6) and cover plate (8) from engine bell housing (5.2).
(6)
Attach engine barring tool (9) to engine drive plate/ring gear (10).
(7)
Rotate engine barring over tool (9) clockwise to remove eight flex plate retaining bolts (11) and lockwashers (12)
through access hole on engine bell housing (5.2). Discard lockwashers.
(8)
Remove 12 nuts (13), lockwashers (14), bracket (14.1), and two cushion clips (14.2) from engine block mounting
studs (15). Discard lockwashers.
(9)
Using a pry bar (16), carefully separate transmission (17) from engine (18).
(10) Place transmission (17) on suitable stand.
(11) Remove lifting equipment and adjustable sling from lifting eye (1).
(12) Remove lifting eye (1) from transmission (17).
Change 1
4-35
