TM 5-2420-230-24-1
.
NOTE
Hose clamps must be retorqued after vehicle has been run at normal operating temperature.
(21) Install upper engine coolant hose (6) and clamp (5) on water outlet (7). Torque clamp to 50-70 lbf/in
(5.6-7.9 Nm).
(21.1)Install two fittings (4.1) and hoses (2) on oil filter head (4.2).
(22) Install two fittings (3) and hoses (2) on oil cooler housing (4).
(23) Deleted.
c. Follow-On Maintenance.
Install power pack (Para 4-7).
END OF TASK
4-9. TRANSMISSION COMPONENT REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
References
Test Equipment
None
None
Equipment Conditions
Tools and Special Tools
TM or Para
Condition Description
Tool kit, general mechanics, Item 38, Appendix B
Power pack removed.
Materials/Parts
Drawings Required
Cap and plug set, Item 4, Appendix C
TM 5-2420-230-24P Figure 88
Gasket, Item 87.1, Appendix D
TM 5-2420-230-24P Figure 91
Gasket, Item 87.2, Appendix D
TM 5-2420-230-24P Figure 92
Gasket, Item 87.3, Appendix D
TM 5-2420-230-24P Figure 93
Gasket, Item 88, Appendix D
TM 5-2420-230-24P Figure 94
Pin, cotter, Item 173.2, Appendix D
TM 5-2420-230-24P Figure 95
Tags, identification, Item 63, Appendix C
TM 5-2420-230-24P Figure 96
Ties, cable, Item 68, Appendix C
TM 5-2420-230-24P Figure 97
Washer, lock, Item 273, Appendix D (6)
TM 5-2420-230-24P Figure 149
Washer, lock, Item 281, Appendix D (4)
Washer, lock, Item 282, Appendix D (4)
Estimated Time to Complete
Part of Transmission Replacement in MAC,
Personnel Required
MOS 62B, Construction Equipment Repairer
Change 1