TM 5-2420-230-24-1
Adhesives, solvents, and sealing compounds burn easily and give off vapors that are harmful to the skin
and clothing. To avoid injury or death, keep away from open fire when using these materials, and use
only in well-ventilated areas. If adhesives, solvents, or sealing compounds contact the skin or clothing,
wash immediately with soap and water, and rinse thoroughly. Failure to comply may result in injury or
death to personnel.
(6)
Apply Loctite 567 to fittings (2).
(7)
Install two fittings (2) on control cylinder (3).
(8)
Install two air lines (1) on control cylinder (2).
c. Follow-On Maintenance.
(1)
Start engine and ensure that vehicle properly switches between high and low ranges
(2)
Check for air leaks.
(3)
Shut OFF engine (TM 5-2420-230-10).
(4)
Install center belly plate (TM 5-2420-230-10).
END OF TASK
4-57/4-58 blank
Change 1
