TM 5-2420-230-24-1
(1)
Install 90-degree elbow (16) on power steering pump (10).
(2)
Install 90-degree elbow (15) on power steering box (1).
(3)
Install hose assembly (14) on 90-degree elbow (16).
(4)
Install hose assembly (14) on 90-degree elbow (15).
(5)
Install 90-degree elbow (13) on power steering pump (10).
(6)
Install 45-degree elbow (12) on power steering fluid reservoir (6)
(7)
Install hose assembly (11) on 90-degree elbow (13).
(8)
Install hose assembly (11) on 45-degree elbow (12)
(9)
Install nipple (9) on power steering pump (10).
(10) Install nipple (8) on power steering fluid reservoir (6).
(11) Install hose assembly (7) on nipple (9).
(12) Install hose assembly (7) on nipple (8).
(13) Install elbow (5) on power steering fluid reservoir (6).
(14) Install adapter union (4) on 90-degree elbow (5).
(15) Install nipple (3) on power steering box (1).
(16) Install hose assembly (2) on adapter union (4).
(17) Install hose assembly (2) on nipple (3).
(18) Ensure power steering fluid reservoir (6) is filled with clean oil.
c. Follow-On Maintenance.
(1)
Bleed power steering system (Para K-3).
(2)
Start engine (TM 5-2420-230-10).
Do not check for leaks by hand; oil under hydraulic pressure can penetrate the skin and cause severe
injury. Failure to comply may result in injury or death to personnel.
(3)
Visually check all fittings and hoses for external leaks.
(4)
Shut OFF engine (TM 5-2420-230-10).
(4.1) Close hood (TM 5-2420-230-10).
(5)
Remove "Do Not Operate" tag from ignition switch (TM 5-2420-230-10).
END OF TASK
Change 1
5-10