• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
POWER STEERING RESERVOIR REPLACEMENT. - Continued
POWER STEERING PUMP REPLACEMENT - Continued

Maintenance Manual For Interim High-Mobility Engineer Excavator
Page Navigation
  219    220    221    222    223  224  225    226    227    228    229  
img
. . . . . . . . . . . . . . . . . . .
TM 5-2420-230-24-1
5-8. POWER STEERING PUMP REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Test Equipment
Personnel Required
None
MOS 62B, Construction Equipment Repairer
Tools and Special Tools
References
Pan, drain, Item 29, Appendix B
None
Tool kit, common no. 2, Item 36, Appendix B
Equipment Conditions
Tool kit, general mechanics, Item 38, Appendix B
TM or Para
Condition Description
TM 5-2420-230-10
Hood raised.
Materials/Parts
Cap and plug set, Item 4, Appendix C
TM 5-2420-230-10
FEL arms raised and
Cloth, lint-free, Item 10, Appendix C
maintenance arm installed.
Compound, sealing, Loctite 567, Item 22, Appendix C
Para 13-16
Left fender removed.
Gasket, Item 84, Appendix D
Drawings Required
Solvent, degreasing, Item 58, Appendix C
TM 5-2420-230-24P Figure 110
Tags, identification, Item 63, Appendix C
TM 5-2420-230-24P Figure 111
Ties, cable, Item 68, Appendix C
Washer, lock, Item 281, Appendix D (2)
Estimated Time to Complete Task
Refer to MAC in Appendix B
a. Removal.
Degreasing Solvent (MIL-PRF-680) is toxic and flammable. Keep away from heat or flame. Never
smoke when using solvent. The flashpoint for Type II Degreasing Solvent is 141 F (61 C). Wear
protective goggles, face shield, and gloves; use only in a well-ventilated area; avoid contact with
skin, eyes, and clothes; and do not breathe vapors. Failure to comply may result in injury or death
to personnel.
If personnel become dizzy while using cleaning solvent, immediately get fresh air and medical
help. If solvent contacts skin or clothes, flush with cold water. If solvent contacts eyes, immediately
flush eyes with water and get immediate medical attention.
Adhesives, solvents, and sealing compounds burn easily and give off vapors that are harmful to the
skin and clothing. To avoid injury or death, keep away from open fire when using these materials,
and use only in well-ventilated areas. If adhesives, solvents, or sealing compounds contact the skin
or clothing, wash immediately with soap and water, and rinse thoroughly. Failure to comply may
result in injury or death to personnel.
Change 1
5-13


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.