TM 5-2420-230-24-1
b. Secondary Fuel Filter Removal.
(1)
Place suitable container beneath secondary
filter.
(2)
Remove secondary filter canister by
unscrewing it counterclockwise. Discard
filter element.
c. Secondary Fuel Filter Replacement.
(1)
Coat secondary filter canister sealing gasket
with clean fuel.
(2)
Fill new secondary filter canister with clean
fuel and install on filter head. Tighten per
manufacturer's instructions on canister.
(3)
Prime fuel system by pumping primer button
several times until resistance is felt. Primer is
located just below secondary fuel filter.
d. Primary Fuel Filter (Fuel/Water Separator) Replacement.
(1)
Coat primary filter canister sealing gasket with clean fuel.
(2)
Fill new primary filter canister with clean fuel and install on filter head. Tighten per manufacturer's instructions on
canister.
(3)
Prime fuel system by pumping primer button several times until resistance is felt. Primer is located just below
secondary fuel filter.
e. Follow-On Maintenance.
(1)
Start engine (TM 5-2420-230-10) and check for signs of fuel or air leaks.
(2)
Shut OFF engine (TM 5-2420-230-10).
(3)
Close engine hood and secure clips (TM 5-2420-230-10).
(4)
Remove "Do Not Operate" tag from ignition switch (TM 5-2420-230-10).
END OF TASK
Change 1
7-5
