TM 5-2420-230-24-1
b. Cleaning.
Degreasing Solvent (MIL-PRF-680) is toxic and flammable. Keep away from heat or flame. Never
smoke when using solvent. The flashpoint for Type II Degreasing Solvent is 141 F (61 C). Wear
protective goggles, face shield, and gloves; use only in a well-ventilated area; avoid contact with
skin, eyes, and clothes; and do not breathe vapors. Failure to comply may result in injury or death
to personnel.
If personnel become dizzy while using cleaning solvent, immediately get fresh air and medical
help. If solvent contacts skin or clothes, flush with cold water. If solvent contacts eyes, immediately
flush eyes with water and get immediate medical attention.
Adhesives, solvents, and sealing compounds burn easily and give off vapors that are harmful to the
skin and clothing. To avoid injury or death, keep away from open fire when using these materials,
and use only in well-ventilated areas. If adhesives, solvents, or sealing compounds contact the skin
or clothing, wash immediately with soap and water, and rinse thoroughly. Failure to comply may
result in injury or death to personnel.
With the use of a lint-free cloth and degreasing solvent,
inspect and clean fuel tank breather (1). Replace if
necessary.
c. Installation.
(1)
Insert adapter (2) through mounting bracket (3) and
screw on fuel tank breather (1) until tight.
(2)
After fuel tank breather (1) is installed, ensure fuel
tank breather and lines are clear of any obstructions.
d. Follow-On Maintenance.
Remove "Do Not Operate" tag from ignition switch
END OF TASK
Change 1
7-7