TM 5-2420-230-24-1
g. Follow-On Maintenance.
(1)
Install fuel sending unit (Para 12-37).
NOTE
If vehicle has cold weather kit, perform
Steps (1.1) and (1.2).
(1.1) Remove plug (6).
(1.2) Install fuel pickup tube assembly (Para 20-9).
(1.3) Install fuel tank step plate (Para 13-14).
(2)
Start engine (TM 5-2420-230-10) and check for
leaks.
(3)
Shut OFF engine (TM 5-2420-230-10).
(4)
Install right-front belly plate (TM 5-2420-230-10).
(5)
Remove "Do Not Operate" tag from ignition switch
END OF TASK
7-8. FUEL SHUT-OFF VALVE REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Test Equipment
Equipment Conditions
None
TM or Para
Condition Description
Vehicle positioned on level
ground.
Tools and Special Tools
Tool kit, general mechanics, Item 38, Appendix B
Parking brake applied.
Engine shut OFF.
Electrical master switch OFF.
Materials/Parts
Nut, self-locking, Item 101, Appendix D
"Do Not Operate" tag attached
to ignition switch.
Hood raised.
Personnel Required
MOS 62B, Construction Equipment Repairer
Drawings Required
TM 5-2420-230-24P Figure 38
References
None
Estimated Time to Complete Task
Refer to MAC in Appendix B
Change 1