TM 5-2420-230-24-1
13-14. FUEL TANK STEP PLATE REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Test Equipment
None
TM or Para
Condition Description
Vehicle positioned on level
Tools and Special Tools
ground.
Tool kit, general mechanics, Item 38, Appendix B
Parking brake applied.
Engine shut OFF.
Materials/Parts
Electrical master switch OFF.
None
"Do Not Operate" tag attached
to ignition switch.
Personnel Required
Arctic heater removed
MOS 62B, Construction Equipment Repairer
(if equipped)
References
Drawings Required
None
TM 5-2420-230-24P Figure 206
Estimated Time to Complete Task
Refer to MAC in Appendix B
a. Removal.
NOTE
If vehicle has cold weather kit, refer to Para 20-5 for removal procedure.
(1)
Remove four bolts (1) and washers (2) from
fuel tank step plate (3).
(2)
Remove fuel tank step plate (3) from fuel
tank.
b. Installation.
NOTE
If replacing step plate, and vehicle has cold
weather kit, refer to Para 20-5 for
modifications to fuel tank step plate before
proceeding.
(1)
Place fuel tank step plate (3) on fuel tank,
ensuring that pilot holes are aligned.
(2)
Install four washers (2) and bolts (1). Tighten bolts.
c. Follow-On Maintenance.
(1)
Remove "Do Not Operate" tag from ignition switch (TM 5-2420-230-10).
(2)
Install arctic heater (Para 20-5) (if equipped).
END OF TASK
Change 1