TM 5-2420-230-24-1
a. Removal.
NOTE
Tag all hoses, wires, and tubes and note their
positions before removal.
Remove cable ties as necessary.
Ensure all hoses, wires, and tubes are
disconnected and clear before removal.
Both rear fenders are removed in the same
manner. Left fender shown.
(1)
Remove three self-locking nuts (1), bolts (2),
washers (3), and mudflap assembly (4) from
fender (5) and bracket (6). Discard self-locking
nuts.
(2)
Remove two self-locking nuts (7) and bolts (8)
from cab (9) and fender (5). Discard self-locking
nuts.
(3)
Remove two bolts (10) from body (11) and
fender (5).
(4)
Remove 15 bolts (12) and washers (13) and
fender (5) from body (11).
b. Installation.
NOTE
Ensure all hoses and tubes are reconnected to
positions noted prior to removal.
Install cable ties as necessary.
(1)
Install 15 bolts (12), washers (13), and fender (5) on
body (11).
(2)
Install two bolts (10) on body (11) and fender (5).
(3)
Install two bolts (8) and new self-locking nuts (7)
on cab (9) and fender (5).
(4)
Install three bolts (2), washers (3), new self-locking
nuts (1) and mudflap assembly (4) on fender (5) and
bracket (6).
Change 1
13-26
