TM 5-2420-230-24-1
(5)
Remove 43 rivets (18) connecting hinge (17) to nose cone (3). Discard rivets.
(6)
Remove bolt (19), washer (20), lockwasher (21), ball socket (22), and light assembly (8) from nose cone (3).
Discard lockwasher.
(7)
Repeat Step (6) for other light assembly (8).
(8)
Install bolt (19), washer (20), new lockwasher (21),
ball socket (22), and light assembly (8) on nose
cone (3).
(9)
Position light assembly (8) level horizontally and
angled outward as far as possible without hitting
grill (13).
(10) Install 43 new rivets (18) connecting hinge (17) and
grill (13) on nose cone (3).
(11) Install four bolts (14), washers (15), and two
wires (16) to grill (13).
(12) Install bolt (11) and latch (12) to grill (13).
(13) Close grill (13).
(14) Install bolt (9) and seal (10) to nose cone (3).
Change 1
13-29
