TM 5-2420-230-24-1
a. Removal.
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical
circuits, a direct short may result. Damage to equipment and injury or death to personnel may occur.
NOTE
Both sides are removed in same manner, left side shown.
(1)
Remove two bolts (1) and self-locking nuts (2) from the nose cone (3). Discard self-locking nuts.
(2)
Remove six bolts (4), lockwashers (5), and washer (6) from the nose cone (3). Discard lockwashers.
(3)
Disconnect two electrical connectors (7) from the light assembly (8).
(4)
Remove nose cone (3) from vehicle.
b. Repair.
(1)
Remove four bolts (9) and seal (10).
(2)
Remove bolt (11) and latch (12) from grill (13).
(3)
Open grill (13).
(4)
Remove four bolts (14), washers (15), and two wires (16) from nose cone (3).
Change 1
13-28