TM 5-2420-230-24-1
This Task Covers:
a. Inspection
b. Removal
c. Installation
d. Follow-On Maintenance
INITIAL SETUP
Test Equipment
Equipment Conditions
None
TM or Para
Condition Description
Vehicle positioned on level
ground.
Tools and Special Tools
Parking brake applied.
Engine shut OFF.
Electrical master switch OFF.
Materials/Parts
"Do No Operate" tag attached to
ignition switch.
Wipers removed, if required.
Drawings Required
Personnel Required
MOS 62B, Construction Equipment Repairer
Estimated Time to Complete Task
References
None
a. Inspection.
There are no routine maintenance activities (other than cleaning and visual inspection) detailed for vehicle glass. Inspect
glass for the following:
(1)
Check for broken or damaged glass.
(2)
Tape all broken glass.
(3)
Ensure glass is securely bonded to frame.
(4)
Cab windows are bonded to frames; replacement is a specialist's task.
(5)
Ensure sliding windows open and close correctly.
(6)
Ensure securing devices function correctly.
(7)
Replace glass only with genuine ADI parts.
Change 1