TM 5-2420-230-24-1
13-22. WIPER BLADE AND ARM REPLACEMENT.
This Task Covers:
a. Inspection
b. Removal
c. Installation
d. Follow-On Maintenance
INITIAL SETUP
Test Equipment
Equipment Conditions
None
TM or Para
Condition Description
Vehicle positioned on level
ground.
Tools and Special Tools
Tool kit, general mechanics, Item 38, Appendix B
Parking brake applied.
Engine shut OFF.
Electrical master switch OFF.
Materials/Parts
Cap and plug set, Item 4, Appendix C
"Do Not Operate" tag attached
Tags, identification, Item 63, Appendix C
to ignition switch.
Ties, cable, Item 68, Appendix C
Drawings Required
TM 5-2420-230-24P Figure 65
Personnel Required
MOS 62B, Construction Equipment Repairer
TM 5-2420-230-24P Figure 66
References
Estimated Time to Complete Task
None
Refer to MAC in Appendix B
a. Inspection.
There are no routine maintenance activities (other than visual inspection) detailed for vehicle wipers. Inspect front and
rear wipers for the following:
(1)
Ensure wiper blades are free of damage. Repair/replace as necessary.
(2)
Ensure wiper arms are free of damage and misalignment. Repair as necessary.
NOTE
To avoid damaging wiper blades and arms, do not operate wipers on dry windshield.
(3)
Functionally test wipers. Ensure wipers clear windshield and park correctly. Repair as necessary.
Change 1