TM 5-2420-230-24-1
(3)
Remove two pins (4).
(4)
Press in on rear plastic cover (5) on both sides of seat
and unhook rear plastic cover from side covers (6).
(5)
Fold backrest (7) forward and remove two screws (8).
(6)
Fold backrest (7) rearward and remove two front
screws (9).
(7)
Remove operating handles (10) from right side of
seat.
(8)
Remove lumbar support valve (11) from right side of
seat.
(9)
Remove two screws (12) and side covers (6).
(10) Raise headrest (13) to highest position.
(11) Press in on spring (14) through cushion (15) and
remove headrest (13).
(12) Remove seat belt attachment screw (16) and seven
screws (17) from backrest cover (18).
(13) Pull seat belt (19) out slightly, loosen backrest
cover (18) at bottom and lift backrest cover up out of
seat belt reversing guide (20).
(14) Remove screw (21) from belt reversing guide (20).
(15) Push seat belt (19), along with seat belt tongue and
anchor plate (22), through opening (23) in backrest
cover (18).
(16) Remove buckle attachment bolt (24) and buckle (25).
b. Installation.
(1)
Install buckle (25) with buckle attachment bolt (24).
(2)
Feed seat belt (19) and seat belt tongue and anchor
plate (22) through opening (23) in backrest
cover (18).
(3)
Install screw (21) on belt reversing guide (20).
(4)
Install seat belt attachment screw (16) through anchor
plate (22).
(5)
Install seven screws (17) through backrest cover (18).
(6)
Install headrest (13).
(7)
Install two screws (12) into side covers (6).
(8)
Assemble lumbar support valve (11).
(9)
Install operating handles (10).
(10) Fold backrest (7) rearward and install two front
screws (9).
(11) Fold backrest (7) forward and install two rear screws (8).
(12) Hook rear plastic cover (5) into side plastic covers (6) and install two pins (4) to secure rear plastic cover in place.
Change 1
13-17
