TM 5-2420-230-24-1
b. Installation.
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical
circuits, a direct short may result. Damage to equipment and injury or death to personnel may occur.
(1)
Loosen jam nut (2) on shut-off valve arm (5).
(2)
Install fuel shut-off valve (10) in valve bracket (8).
(3)
Install valve bracket (8) on mounting bracket (9) with two bolts (7).
(4)
Install washer (4), new self-locking nut (3), and fuel shut-off valve arm (5) on stud (6).
NOTE
For proper installation, ensure length of shaft is as noted prior to removal.
(5)
Tighten jam nut (2) and connect electrical connection (1).
c. Follow-On Maintenance.
(1)
Lower hood (TM 5-2420-230-10).
(2)
Start engine and functionally test fuel shut-off valve (TM 5-2420-230-10).
(3)
Shut OFF engine (TM 5-2420-230-10).
(4)
Remove "Do Not Operate" tag from ignition switch (TM 5-2420-230-10).
END OF TASK
7-13/7-14 blank
Change 1
