TM 5-2420-230-24-1
Use care when removing or installing snap
and retaining rings. Snap and retaining rings
are under spring tension and can act as
projectiles when released and could cause
severe eye injury.
(3)
Remove two circlips (3) and washers (4)
from pivot pins (5).
(4)
Attach suitable lifting device and sling to
bucket cylinder (2).
Hydraulic cylinder is heavy. Use an
appropriate lifting device and follow safe
working procedures when lifting or moving
hydraulic cylinder. Failure to comply may
result in injury or death to personnel.
(5)
Remove pivot pins (5) from bucket cylinder (2). Remove bucket cylinder.
b. Disassembly.
(1)
Remove clamp (6) from bucket cylinder (2).
(2)
Disconnect two hoses (7) from bucket
cylinder (2).
(3)
Remove fitting (8), elbow (9), and two
O-rings (10) from bucket cylinder (2).
Discard O-rings.
c. Assembly.
(1)
Install fitting (8), elbow (9), and two new
O-rings (10) on bucket cylinder (2).
(2)
Connect two hoses (7) to bucket cylinder (2).
(3)
Install clamp (6) on bucket cylinder (2).
Change 1
10-34