TM 5-2420-230-24-1
c. Disassembly.
Do not drop bearing cups. Needle bearings can be
easily lost, which will cause damage to the vehicle.
(1)
Remove grease fitting (1) from cross (2).
NOTE
Ensure open end of socket is facing bearing cup.
(2)
Position drive shaft yoke (3) in vise with 1 1/8-in.
(29 mm) socket between vise jaw and bearing
cup (4) being removed.
NOTE
Ensure open end of socket is facing vise jaw.
(3)
Remove two bolts (5) on each end of bearing caps.
(4)
Place 1 1/8-in. (29 mm) socket between opposite
bearing cup (4) and vise jaw.
(5)
Press bearing cup (4) out of drive shaft yoke (3).
Remove bearing cup (4) from cross (2).
(6)
Reverse position of sockets and press remaining
bearing cup (4) out of drive shaft yoke (3).
(7)
Remove drive shaft yoke (3) from cross (2).
(8)
Repeat Steps (2) through (5) for drive shaft yoke (3).
(9)
Remove cross (2) from drive shaft yoke (3).
Change 1
14-7
